banner ad
 

Quinte Fishing

Fishing Reports for the Bay of Quinte
It is currently Tue Nov 26, 2024 8:37 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon Sep 02, 2013 6:30 pm 
Offline
Perch

Joined: Fri Jan 29, 2010 9:19 pm
Posts: 35
Looking for any recommendations on who can repair damaged hull on my aluminum lund 1700 fisherman. Require dent repair and then a paint touch up.
Thanks in advance.


Top
 Profile  
 
PostPosted: Mon Sep 02, 2013 6:44 pm 
Offline
Walleye Wisdom

Joined: Wed Oct 24, 2012 6:28 pm
Posts: 648
Got any pictures? Is it something you can use a proper hammer and dolly on?

_________________
LUCK HAS NOTHIN TO DO WITH IT!!!!!!


Top
 Profile  
 
banner ad
PostPosted: Tue Sep 03, 2013 3:13 pm 
Offline
Walleye

Joined: Wed Oct 26, 2011 9:53 am
Posts: 178
Location: Bracebridge,ON
Stewart...very unfortunate about your hull damage.

For what it is worth, I ran into a similar problem with my 16ft Lund Rebel. I was travelling in a marked channel on Lake Muskoka and one end of a submerged deadhead log had lifted from the bottem (10-12ft) on a 45 degree angle with the other end still wedged into the bottom. I stuck it at a good clip nearly throwing one of my occupants over the bow.

Got back to the lift and had a repair guy come look at it. It looked bad but was just a very large dent and did not puncture the hull. The guy that looked at it gave me some good advice. "If it doesn't leak now it probably won't, if it doesn't effect performance your should just leave it and accept it as it is. Pulling the interior apart and banging out the damage could cause more and it will never be perfect...and his parting comment was, thankfully it was an aluminum hull, glass and I was surely swimming, and the comment that stood out for me was...its a Lund and they are one tough boat, I would just leave it and monitor it." He determined there was no internal structural support damage.

I subsequently sold it with the damage disclosed and the guy that has it (going on 3yrs) has had no issues at all. Bought another bigger Lund.


Top
 Profile  
 
banner ad
PostPosted: Thu Sep 05, 2013 11:43 am 
Offline
Perch

Joined: Fri Jan 29, 2010 9:19 pm
Posts: 35
I tend to agree, as the damage is not structural, and there is no leakage. I may opt to try and camoflauge the area with some creative graphics.
I have been told that hammering it out would not likely work very well.
Thanks "pickerel killer" and "WalleyeWon" for the feedback.


Top
 Profile  
 
banner ad
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 
banner ad


All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 69 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB® Forum Software © phpBB Group