Quinte Fishing

Thank you D-wayne,
Didn't know that, very good points with it as well.

Here it is fellas I need to clean the floor and install the window frame and some other odds and ends,

D you know the name of this product and where to get it?

looking good but I must say don't forget your sunglasses and sunscreen on a sunny day !

Thanks, I had an aluminum floor in one of my other boats and it was fine after a day or two scratching it up.

Nice work Papa... I will be posting my floor project now. Hope to see you on the water sometime.

Really great work papa, and the advices are also great and helpful for me too. I replaced the floor in my 16 foot Blu Fin two years ago.
Even 1/2 marine plywood is heavy weight wise.
Got it for $49 at Menards on sale.
Give each side of ply two coats of marine spar varnish.
Since this was a replace, I was able to use the old floor as a template, then when installing, put an awl or screwdriver in all the holes to ensure alignment before setting fasteners.
When fastening, I used alum rivets from Fastenall. Make sure you use rivets that are compatible with the aluminum hull / seats they touch to prevent galvanation.
Length is critical for holding power.

_________________
Inverter Welder