 |
| Walleye Angler |
Joined: Wed Jan 04, 2012 1:32 pm
Posts: 282
|
|
hey big mac
around $1400 give or take the variables are unlimited with the amount of details you want to put into it
the main cost is the actual material it is from 3m designed specifically for marine use not cars
example was a 17 princecraft only cost me $850 because the side of the hull only need wrap half way down not the entire area
best advice I can provide from my experience stay with the existing base colour of your boat, you will have scratches and dings eventually but will not show, if your boat is red and you cover in black and you get a scratch on the wrap you will see the red!!
it is a fun job designing what you want in the graphics
grant can add any detail in the wrap and does not effect cost
you have a 18'6 Starcraft so you could get a picture of a 2017 model and use this as your wrap to update the look this is what I did with my present boat a tracker all my graphics are updated but my boat is a 2005
good luck
|
|
Login
Register
FAQ
Search
