Cannon Digi-Troll 10 down rigger

justfishing2010 · **Joined:** Wed Dec 15, 2010 8:07 pm **Posts:** 20

I will be installing Cannon Digi-Troll 10 downrigger with the Digi-Troll IV 120khz transducer on my boat this spring.
My question is will the Cannon Digi-Troll IV 120khz transducer cause interfrence with my Lowrance HDS2, I will also be insatlling Lowrance Structure Scan HD

Thanks

Radioworld · **Joined:** Tue Dec 20, 2011 1:31 pm **Posts:** 436

It is possible but I would say fairly unlikely. Usually two frequencies that are close together will interfere with each other. For example 192 kHz and 200 kHz. That is why sonar manufactures use two frequencies that are far apart on the spectrum in their dual beam transducers like 200 and 83 or 200 and 50.

In your case you may notice some interference on the 83 kHz but the 200 and StructureScan should be ok. Unfortunately there is not real rule to go by here you just have to try it and see.

-Lawren

justfishing2010 · **Joined:** Wed Dec 15, 2010 8:07 pm **Posts:** 20

I feel better knowing litter or no interference

Thanks for the info Lawren

HOME	Bait&Tackle	Bed&Breakfast	Boat Rentals	Campgrounds	Contact Us
Cottage Rentals	Guides/Fishing Charters	Hotels/Motels	Hunting Supplies	Ice Huts/Ice Guides	Marinas
Outfitters	QUINTE FISHING SERIES	Resorts	Tourism	Trailer Parks	Launches

Quinte Fishing

Cannon Digi-Troll 10 down rigger

Who is online