Quinte Fishing

Checking out my bearings on boat trailer,I have bearing buddies I would like to know what grease I should use.The wheels never been done( 6 yrs always greased every year) the grease that's in there like black soup...brother at TT Mech just bearing grease ok...I'm thinking about water???

_________________
YOU CAN'T PUT A PRICE ON RECREATION <*{{{{><

I would for sure, clean and repack the bearing. If you don't have trailer brakes this only takes about a hour.If the grease is black inside and show signs of water I'd do them for sure. . If your not going to clean them at least jack up trailer and feel for bearing play, if there's play present your goin to have to do it!!
Don't let it go or it will come back to bite ya, at the worse time and place.

Any questions on how to do bearing or anything msg me and I help ya.( use high temp bearing grease)

I use marine grease from CTC for my wheel bearings and fittings on my outboards.
Skeet

Thanks for input guys.

_________________
YOU CAN'T PUT A PRICE ON RECREATION <*{{{{><

I rebuilt my trailer last fall and used a product called Krazy Grease it is a bit more expensive but says it resists wash out and extends the re-greasing intervals. It is sold at Princess Auto.

_________________
I am a very quick learner and try to be the best at what I do.
My friends call it OCD. I call it Passion.

Go to youtube and search for repack trailer wheel bearing. There are lots of step by step videos that show every step of the process.

_________________
I am a very quick learner and try to be the best at what I do.
My friends call it OCD. I call it Passion.

try some MOBIL epic grease 102 its a semi syn and its good for high heat and repels water I use this stuff on CP and CN high rails let me know doug and and maybe I can hook ya up with a tube.......chris

_________________
FISHING'S NOT A MATTER OF LIFE OR DEATH,ITS MUCH MORE IMPORTANT

Use a high quality wheel bearing grease only. The bearing buddies when the proper pressure is applied to them are free of water. Just don't over pressurize as this will blow out a seal and you will have trouble.
There is an alternate bearing system that I currently have-liquid lube bearings, it's an oil based product that is in a sealed chamber. 5 years running now and very happy.

got the job done,new seals...she is golden thx for replys

_________________
YOU CAN'T PUT A PRICE ON RECREATION <*{{{{><