Mercury outboard repairs.

Blue Pickerel · **Posted:** Tue Jun 14, 2016 3:17 pm

Hi guys, as most marinas in the Bellville area are extremely busy with long wait times, does anyone
know a marina mechanic in the area that might help me. I have a 40 Mercury outboard that has lost
trim or tilt completely. Thank you Donn

Walleye 9 · **Joined:** Mon Jan 24, 2011 12:05 pm **Posts:** 1985

Not sure if this is too far for you, but there is a Mercury dealer north of Cobourg that would be worth giving a call. Harris Boat Works is the name of the marina. I've dealt with them before and they are decent people. They only had my boat for a few days.

fireball · **Posted:** Tue Jun 14, 2016 7:39 pm

If you lift motor up, it falls down ? slowly or fast ? do you hear pump running when you hold trim button ?

Blue Pickerel · **Posted:** Tue Jun 14, 2016 7:53 pm

Howdy Fireball. Motor would fall slowly when in up position, total fall of about 3- to 4 minutes. I drained
all hydraulic oil and put in new oil. I can hear pump, but now it will not go up at all, stuck in down
position. Thank you. Donn

fireball · **Posted:** Wed Jun 15, 2016 7:30 am

After you change fluid you have to reprime it. manual lifting motor up and down often will do this.
Those screws often crack, and cause a leak. sounds like system had a leak some where.

cantcatchacold · **Posted:** Wed Jun 15, 2016 7:42 am

Harris is good. They have my merc 40 now re doing the coils. Went on a 14 hr trip up north last week to have it die on the 2nd day.

WALLYMAN · **Joined:** Wed Oct 11, 2006 10:10 am **Posts:** 199

Donn there is a guy in Shannonville works out of his house. Good guy, fair prices. 2nd left off York after you cross the river. You will see boats in his yard.

Regards

Gone Fish'in · **Joined:** Thu Feb 25, 2010 10:42 am **Posts:** 1047

Hey Donn, I know, I may be 20 years younger than you but heed these words... Get your wife to by you a Honda...

Blue Pickerel · **Posted:** Wed Jun 15, 2016 5:02 pm

Hey guys, thank you for all the suggestions and concern. Rather than waste anymore prime fishing
time searching, I've decided to go with J.P. Marine, 5 minutes from my home in Corbyville. This way I
only lose 2 weeks of fishing waiting for repairs. Thanks everyone again. Donn

HOME	Bait&Tackle	Bed&Breakfast	Boat Rentals	Campgrounds	Contact Us
Cottage Rentals	Guides/Fishing Charters	Hotels/Motels	Hunting Supplies	Ice Huts/Ice Guides	Marinas
Outfitters	QUINTE FISHING SERIES	Resorts	Tourism	Trailer Parks	Launches

Quinte Fishing

Mercury outboard repairs.

Who is online